Published on April 30, 2026

Code Marathon - Parametric Mug

In this code marathon I created a parametric mug generator using pure code and no AI assistance. I live streamed my work and talked through everything I did. You can watch the streams below.

Mug

Cup height (mm):

Cup diameter (mm):

Wall thickness (mm):

Bottom thickness (mm):

Bracket

Bracket End Width (mm):

Bracket Extension (mm):

Bracket Draft Angle (deg):

Bracket Thickness (mm):

Bracket Tangent Cutoff Distance (mm):

Handle

Handle Diameter (mm):

Handle Offset (mm):

Handle Length (mm):

Assembly

Bottom Bracket Offset (mm):

Bracket Gap (mm):

Handle Bottom Bracket Offset (mm):

Live Streams

I completed the project over three live stream sessions. I learned some lessons on my first steel building code marathon stream

Part 1 (4 hours 25 minutes)

Part 2 (1 hour 32 minutes)

Part 3 (2 hours 4 minutes)

Use of this content is subject to the terms described in the license section of the about page.

Code Marathon - Parametric Mug

Live Streams ​

Part 1 (4 hours 25 minutes) ​

Part 2 (1 hour 32 minutes) ​

Part 3 (2 hours 4 minutes) ​

Live Streams

Part 1 (4 hours 25 minutes)

Part 2 (1 hour 32 minutes)

Part 3 (2 hours 4 minutes)